装载机的部件包括发动机，变矩器，变速箱，前、后驱动桥，车架地盘。

1、卸载载角
 装载机铲斗处于最高提升位置并最大前倾时.其底部平面与水平面之间形成的角度。
When the bucket is in the maximum lift position and the maximum forward is formed between a bottom plane and the horizontal plane.

2、卸载高度
 装载机当动臂有处于最高位置，铲斗卸载角为45°时.从地面到斗刃最低点之间的垂直距离。若卸载角小于45°，则应注明卸载角度。
When there is motion in the highest position, the bucket unloading angle of 45 °. The vertical distance from the floor to the lowest point between the hopper edge. If you uninstall the angle is less than 45 °, should indicate unloaded angle.

3、卸载距离
 装载机当动臂处于最高位置，铲斗卸载角为45°，从装载机本体最前面点(包括轮胎或车架)到斗刃之间的水乎距离。若卸载角小于45°，则应注明卸载角度。
When the boom is in the highest position, the bucket unloading angle of 45 °, from the foremost point of the loader main body (including tires or frame) water almost to the distance between the edge of the bucket. If you uninstall the angle is less than 45 °, should indicate unloaded angle.