装载机永保机械电子秤数据稳定、制造工艺先进、检验手段齐全计量准确，保证称重过程中能称量出最高精度的物品，得到了广大用户的欢迎和好评。那么在使用过程中应该注意什么呢？

一、装载机电子秤开机前应先启动装载机,提升动臂8次左右做预热处理,以便使液压油及压力传感器预热到正常用工作温度，减少油温不稳对称重精度的影响。
Boot loader scales preceded Boot Loader enhance instability affecting oil boom around 8 times do preheating so that the hydraulic oil pressure sensor and warm to normal operating temperature by reducing weighing precision.
二、在称重过程中,应避免装载机行驶,称重结束后可任意行驶速度不限.如在称重中行驶,则车速应控制在5km/h以下,但准确度会降低0.5%；提升动臂经过位置传感器时,提升速度尽量均匀。
In the weighing process, should avoid driving loaders, weighed not limited to any conclusion as in weighing the traveling speed driving, the speed should be controlled at 5km / h or less, but accuracy will be reduced by 0.5%;. Enhance the action after the arm position sensor, increase speed as even as possible.
三、装载机在称重时应尽量选择在较平坦的地面上进行提升称重。
Loader should try to choose weighed on relatively flat ground level to enhance weighed.
四、当完成此次称重后,料斗应回落到最低位置,以备下次铲料称重。
Upon completion of the weighing, the hopper should fall to the lowest position to prepare for the next shovel weighed.