1.山东装载机是工程机械中的一种特殊车辆，操作人员应接受厂家的培训、指导，对机器的结构、性能有充分的了解，并获得一定的操作及维护经验进行机器操作。生产厂家提供的《产品使用维护说明书》是操作者操作设备的必备资料，在操作机器前，一定要先阅读《使用维护说明书》，按要求进行操作保养。
1.Shandong loader is mechanical engineering is a kind of special vehicles, operating personnel should manufacturers to accept training, guidance, the structure and the performance of the machine with full understanding of, and access to certain operating and maintenance experience in operation of the machine. Manufacturers provide "product instructions" is the essential information of operator equipment, before operating the machine, be sure to read the "instructions", according to the requirements of operation and maintenance.

2.注意磨合期的工作负荷，磨合期内的工作负荷一半不要超过额定工作负荷的70％，并要安排适合的工作量，防止机器长时间连续作业所引起的过热现场的发生，引发各部件异常磨损。
2.Pay attention to the running in period of working load, working load running in period and half not more than 70% of the rated load, and to arrange suitable workload, prevent machine for a long time continuous operation caused by overheating of the field, causing abnormal wear of the parts.

3.注意经常观察各仪表指示，出现  异常应及时停车予以排除，在原因未找到、故障未排除前应停止作业。
3.Pay attention to often observe the instructions of the instrument, abnormal should be promptly stopped to be excluded, in the cause of the failure to find, the failure should not be excluded before the operation.

4.注意经常检查润滑油、液压油、冷却液、制动液以及燃油油（水）位和品质，并注意检查整机的密封性。检查中发现油水缺少过多，应分析原因。同时，应强化各润滑点的润滑，建议在磨合期内，每班都要对润滑点加注润滑脂（特殊要求除外）。
4.Pay attention to check the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) position and quality, and pay attention to check the seal of the whole machine. The examination found that the lack of oil and water too much, should analyze the reasons. At the same time, we should strengthen the lubrication points, it is recommended that in the running in period, each class must be lubricated point filling grease (except for special requirements).

5.保持机器清洁，及时调整、紧固松动的零部件以防因松动而加剧零部件的磨损或导致零部件丢失。
5.To keep the machine clean, timely adjust, tighten the loose parts to prevent the loosening of the parts caused by the wear or loss of parts.

6.磨合期结束，应对机器进行强制保养，做好检查和调整工作，同时注意油液的更换，建议更换厂家各种专用油液。
6.Run in period end, deal with the machine to carry out compulsory maintenance, do a good job check and adjust the work, and pay attention to the replacement of oil, the proposed replacement of a variety of special oil.

总之，山东装载机在磨合期内使用保养的要求可以归纳为：加强操作、维护各种培训、减轻负荷运转、注意检查各部件工作状态、强化各部位润滑。只要重视并按要求对装载机实施磨合期的保养与维护，就会减少早期故障的发生，延长使用寿命，提高作业效率，使机器为您带来更多收益。