山东装载机铲斗定位系统，具有铲斗任意位置自动放平功能和动臂举升限位功能，在工作中合理的运用这两大功能，能够有效的提高作业效率。那么应该如何调整装载机铲斗的限位装置？

1、 将机器停放在平坦的场地上，变速操纵手柄置于空挡位置。操作先导阀操纵手柄将铲斗平放在地面上，拉起停车制动阀按钮，将发动机熄火。装上车架固定保险杠。
Park the machine on a flat pitch, variable speed control lever in neutral position. Operation of the pilot valve control handle to the bucket flat on the ground, apply the parking brake button to turn off the engine. Mounted on the frame fixed bumper.
2、 松开螺栓，将接近开关总成往前移动，使得接近开关越过磁铁一段距离。
Loosen the bolts, the proximity switch assembly to move forward, so that the magnet close to the switch across a distance.
3、 将启动开关沿顺时针方向转到第一档，接通整车电源。将先导阀的转斗操纵手柄向后扳至极后位置，被电磁力吸住。
The start switch clockwise to the first gear, turn the vehicle off. Will be transferred to the pilot valve bucket pull back after extremely joystick position is sucked electromagnetic force.
4、 将接近开关总成往后移动，使得接近开关对准磁铁，此时先导阀的电磁力小时，转斗操纵杆自动返回中位；拧紧螺栓即可，接近开关与磁铁的距离应保持在4-6mm。
The proximity switch assembly is moved backward, making the alignment of the magnet close to the switch, then the electromagnetic force-hour pilot valve, turn the bucket lever automatically returns the median; tighten the bolts to close the distance switch and magnet should be kept at 4 - 6mm.
5、 完成后，拆除车架固定保险杠，启动发动机，检查所做调整是否合适。
Upon completion, remove the frame fixed bumper, start the engine and check the adjustments are appropriate.