1、虽然装载机还可以工作，但变速器内的油液早已变质，粘度下降并含有金属杂质，因此应在推荐的换油间隔期以前更加频繁地分析变速器的油样。因为山东装载机离合器磨损是变速器故障扩大的标志，如果金属杂质进人齿轮副或卡住齿轮使其不能对中，若再不停机就会研碎变速器中的其他构件。
Although Shandong loader can also work, but transmission oil has gone bad, decrease viscosity and metal containing impurities and should therefore be recommended oil change interval before more frequent analysis of transmission oil

samples. Because Shandong loader clutch wear is a sign of expansion of gearbox fault, if the metal impurities in the gear pair or stuck gear so that it is not possible to in, if we do not stop other components will crush transmission.

2、装载机换挡性能下降是离合器损坏的征兆，离合器开始打滑时，即使平稳加速，机器也会向前冲，此时应?；煨?。
Shandong loader shift performance decline is a sign of damage to the clutch, the clutch began to slip, even if the smooth acceleration, the machine will move forward, this time should be shut down for maintenance.

3、装载机离合器操纵油位下降，当机器必须加速才能使离合器接合时，就说明离合器已出现过度磨损或密封失效现象。因此，测量变速器的油压和观察油温是否上升就可判定离合器的磨损情况，与此同时还应分析油质，若油液中出现铁或铬的微粒，则表明齿轮副已开始磨损。
Shandong loader clutch oil level drops, when machines must be accelerated to make clutch, clutch has been excessive wear or seal failure phenomenon. Therefore, measurement of the transmission oil pressure and observe the temperature would rise can be judged clutch wear. At the same time, we should analysis of oil, if oil in iron or chromium particles, it indicates that the gear pair was beginning to wear out.