装载机由于工作环境等因素，出现故障时在所难免的，以下山东永?；导虻ジ攀錾蕉霸鼗鹱奥痔プ⒁馐孪睢?

1、按顺序进行，并仔细检查装载机所拆装的部件，是否损坏和变形，拆装过程中严禁用大锤敲击钢圈、压圈和锁圈。
Sequentially, and carefully check the Shandong loaders detachable parts for damage and deformation, disassembly process non-steel ring with a sledgehammer percussion, compression ring and lock ring.

2、拆装装载机前轮时，用方木掩住后轮后，用铲斗支起前轮，使前轮离开地面5cm后，用方木将车体垫支牢固铲运机卸载?；阶疾鹱?。
While working in Shandong wheel loaders, with square wooden cover your rear wheel, with support from the bucket wheel, the front wheel off the ground after 5cm, with square wooden scraper firmly advances the vehicle shall be allowed to stop the demolition of unloading loading.

3、拆装装载机后轮时，用长度不小于4m的工字钢或液压顶（规格为不小于120mm）斜放适当角度，铲运机向后行驶，当后轮离开地面5cm时，停止行驶，并用方木掩住前轮，同时用方木将车体垫支牢固方准拆装。
While working rear wheel loaders Shandong, with a length of less than 4m or hydraulic jacking beam (size of not less than 120mm) diagonal appropriate angle, scrapers traveling backwards, when 5cm rear wheel off the ground, stop driving and with square wooden cover your front wheel while the vehicle advances square solid wood are allowed entry.