随着燃油价格的高涨，如何更好的使用和充分的发挥出装载机的性能，同时节约燃料减少了使用和维护的成本，正确的操作装载机，不仅能够减小驾驶员的劳动强度。更重要的一点就是能够降低装载机的故障率、节约了燃料，减少了用户的使用成本。

1、在装载机作业时脚跟紧抵驾驶室地板，脚和油门踏板保持平行。轻轻的下压加油踏板，并始终保持踏板的下压轻缓。这样可以使油料能够充分的燃烧，也不至于操作时过大的油门让司机脚重而手乱。
Heel abutting loader operation when the cab floor, feet and parallel to the accelerator pedal. Gently under the pressure of fuel pedal, and keep the pedal gently under pressure. This allows the oil to fully burn, that does not mean the operation is too large to allow drivers to foot heavy throttle hand chaos.
2、装载机不管是在行走中或是在铲装的作业过程，都不要用力踩踏油门踏板，始终保持油门控制的轻稳平缓性，充分的减少和降低操作中的人为故障。
Loader whether in walking or shovel installed during operation, do not force pressing the accelerator pedal, throttle control light remains steady gentle nature, full of reducing and reducing human error in the operation.
3、装载机在作业时，遇有阻力而猛加油门往往会出现轮胎打滑的现象。这种现象的产生不是装载机的问题，通常是由于驾驶员操作的不当所造成的。这样不仅增加了燃料的消耗量又造成了轮胎的损伤，而造成不必要的麻烦。因此，对装载机驾驶员来说这种现象应该严禁禁止。
Loader in the job, in case of fierce resistance and fuel door will always be a tire slip phenomenon. Problems of this phenomenon is not loaders, usually caused by the driver due to improper operation. This not only increases the fuel consumption of the tire and cause damage, and cause unnecessary trouble. Therefore, the loader driver for this phenomenon should be prohibited prohibited.
4、起升和转斗操纵杆有机的配合。装载机一般的铲挖工作过程首先是铲斗放平地面，平稳的驶向料堆。在铲斗平行铲往料堆遇有阻力时，首先应遵循先起臂后收斗的原则。
Lifting the bucket lever and organic complexes. Digging shovel loaders general working process is first bucket flat ground, smooth sail windrow. In parallel shovel bucket to stockpile in case of resistance, the first principle should be followed after the first arm received from the bucket.
5、严禁撞击料堆。装载机在工作时，普通物料可以用二档铲挖工作。而严禁以二档以上的档位向料堆作惯性冲击,正确地方法应该是铲斗在接近料堆时适时地把档位转换为一档来完成一个铲料的过程。
Do not hit the stockpile. Loader at work, ordinary materials can be used in second gear shovel digging work. The above is strictly prohibited gear to second gear windrow for inertial impact,correct approach should be close to the bucket when the stockpile in a timely manner to complete the stalls converted into a spading process a file.